Pick and Place Machine,Reflow Oven,Wave Soldering,Small Benchtop SMT,Stencil Printers,PCB Magazine Loader
Products Category
Contact Us

Name: Beijing Glichn S&T Development Co.,Ltd
Tel: +8610-65734544
Fax: +8610-65734544
Mobile: 13146162617
E-mail: info@smtchn.com;sales@smtchn.com
Add: Sales department: Floor 17th,Building No.6,Area 7th,ChaoXinJiaYuanDongLi,Chaoyang District,Beijing,China
Skype: GLICHN

News

• SMT technology • Package sizes introduction • Reworking defective SMD compon • Assembly components techniques • SMT placement equipment

Partners
DHL UPS EMS fedex paypal VISA GLICHN
Products

Pick and place machine GP600 ( 6 Heads )

Pick and place machine GP600  ( 6 Heads ) Pick and place machine GP600  ( 6 Heads ) Pick and place machine GP600  ( 6 Heads ) Pick and place machine GP600  ( 6 Heads )
Product name:Pick and place machine GP600 ( 6 Heads )
Item:
Details:

Pick and place machine GP600

Computer control system

The SMT placement machine is generally equipped with computer monitor and mouse. It supports XP and Windows 7. It enables visual programming and PCB file import because of the humanized operating system.

 Automatic PCB loader

 The SMT placement machine can directly put the printing finished PCB board onto

the track to realize automatic board loading, aiming and placing and mounting. It supports multi-feeders: maximum 64 feeders. The size of standard IC tray, tube feeder, stick feeder can be adjustable.

 Synchronous identification by six sets of cameras

The SMT placement machine is equipped with 8 cameras: one MARK, one high precision camera and 6 high-speed cameras. It can realize 6-head synchronous identification to ensure the speed and precision of mounting. The standard configuration is 16 JUKI high precision suction nozzles.

 Servo system

 The SMT placement machine is equipped with servo system imported from

Panasonic, Japan with high precision and stability to ensure 24-hour stable mounting.

 Chain

It adopts high pressure resistant and wear-proof drag chain which is the same type as the one of imported machines. The drag chain can bear thousands of times of proof pressure.

 Track

It adopts high precision track from TBI Taiwan which has low noise and high precision to ensure the accuracy rate of BGA chips. 

Conveyor

This SMT placement machine can be automatically connected to conveyor which can transport the PCB board to the SMT reflow soldering machine without manual assistant, thus saving labor cost. 

Pick and place machine GP600 

Technical Parameter

Number of feeders

64

Number of head

6

XYZ Drive Guide Rail

TBI High-precision heavy-duty straight-line guide rail

Number of camera

8

Maximum circuit board area

510×450mm

Number of IC Tray

48

Average power

500W

Positioning precision

0.01mm

The buffer range of suction nozzle

4.5mm

Power supply

220V, 50/60Hz

Compressed air

0.5-0.6Mpa

Drive motor

Panasonic servo motor

Vacuum source of suction nozzle

high-speed on-off vacuum generator with vacuum breaker

Maximum travel scope in Z axis

20mm

Tape feeder

8, 12, 16, 24mm and vibration suction (mounting pipe chip)

Maximum mounting speed

11000 Pcs/h

Average mounting speed of actual mounting resistance

9200Pcs/h

XYZ drive guide rail

TBI high-precision reloading linear guide rail

Motion drive system

Panasonic high-speed DSP drive

Operating system

full-automatic chip mounter operating system independently

developed by Huawei Guochuang based on Windows

operating systemand it supports windows xp

win7 operating system

Element angle

0-360°, synchronous rotation during movement

X/Y operation mode

intelligent curve of the linear acceleration and deceleration linkage

MARK point positioning

full-automatic (the MARK point can be adjust at will)

Intelligent alarm

automatic correction, automatic filling, feeding shortage alarm

Plate entering mode

automatic connection from left to right in single sections,

automatic PCB transfer positioning. /plunger positioning,

manual plate feeding.

Visual display

17-inch industrial control display, 4:3, resolution: 1280 x1024

Number of recognition cameras

One Mark recognition camera, four quick-recognition cameras

and one precise-recognition camera

Number of recognition cameras

One Mark recognition camera, six quick-recognition cameras

and one precise-recognition camera

Adaptive mounting scope

Adaptive to 0201, 0402, 0603, 0805, 1206, diode, audion, SOT, QFP

within 40*40mm and the pin distance ≥0.3mm

(0.5mm center distance) and BGA

Product weight

680KG

Dimension

1316*1360*1340mm


                 

←[Previous:] [Next:]→

Related Products :
Benchtop Pick and Place Machine GP400( 4 Heads )

Benchtop Pick and Place Machine GP400( 4 Heads )
Pick and place machine GP800( 8 Heads )

Pick and place machine GP800( 8 Heads )
Pick and place machine GP4027

Pick and place machine GP4027