Reflow Oven,Pick and Place Machine,Wave Soldering,Small Benchtop SMT,Stencil Printers,PCB Magazine Loader
Products Category
Contact Us

Name: Beijing Glichn S&T Development Co.,Ltd
Tel: +8610-58494188 +8610-65734544
Fax: +8610-65734544
E-mail: info@smtchn.com
Add: Floor 17th,Building No.6,Area 7th,ChaoXinJiaYuanDongLi,Chaoyang District,Beijing,China
Skype: GLICHN

News

• SMT technology • Package sizes introduction • Reworking defective SMD compon • Assembly components techniques • SMT placement equipment

Partners
DHL UPS EMS fedex paypal VISA GLICHN
Products

Wave Solder Machine LF250

Wave Solder Machine LF250 Wave Solder Machine LF250 Wave Solder Machine LF250 Wave Solder Machine LF250
Product name:Wave Solder Machine LF250
Item:
Details:
Lead-Free Wave solder machine LF250  ( Dual wave )
Description:
Flux spray system:A function of flux spray device
1 nozzle: Japan nozzle ST-6, better spray;
2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe
3 moving nozzle system: air cylinder driven, spray speed and spray width can be adjusted by handle.
4 filtration flux system: collecting device is made of multi collecting lay, it is convenient to clean.
5 flux controlling: anti-corrosive controlling flux and display flux.
 
B Function of flux foam device
With foam function, inner foam pump, it don’t need outer air supply, it is
convenient to spray flux.
 
Preheat system:
1 preheat length: 600mm 1 sections infrared PID Control,Power comsumption:4KW
2 preheating temperature range: room temperature—250℃
3 controlling way: with PID controlling to make welding process.
4 Heat: infrared heating, temperature uniformity, rapid speed, PID supply heat.
5 Preheating security: surface temperature is lower than fire point of flux.
6 Heat power: total power is 12 kw, normal is 6 kw;
7 Preheat: it can meet preheating need of batch PCB welding, uniformity
temperature, small temperature differences of PCB.
 
Welding system features:
1 Tin pot material: 316 stainless steel
2 Capacity: 130kg double wave crest capacity
3 Tin pot temperature room temperature ——300℃ adjusted;
4 Height range of wave crest: 0—12mm adjustment and keep wave crest balance.
5 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
6 Unique spray: double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
7 Heat controlling system: PID control, accuracy is ±2
8 Moving tin pot: in and out can be finished by hand.
9 Motor of wave crest: import motor, running stable.
10 Tin pipe: screw thread stem
 
Cooling system
1 Cooling motor: unique cooling design, it can achieve import device effect.
Transmission system
1 chain: stainless steel chain, anti-corrosive,ametabolic.
2 rail system: special strong aluminum
3 speed: 0—1800mm/min
4 accuracy: motor is from Taiwan, it is easy to adjust and maintain.
 
Controlling system
1 buttons on the panel: manual/ automatic control, speed can be set, temperature can be display.
2 protect short circuit: with short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.
3 urgent stop protection: there are 2 urgent stop protection in the machine, please cut off power in urgent condition.
4 whole machine controlling: relay controlling.
5 transmission speed:  motor makes sure stable speed.
6 wave crest: Taida transducer makes wave crest flatter.
7 over-current protection: over-current protection with transducer, it will cut off power when current is over to make motor safe.
8 modularization wiring device: there are main wiring modularization and controlling modularization.

 Specification:
    Wave solder machine LF250  ( Dual wave )
1 solder type Lead free
2 max PCB 50—250mm  (Can be customized according to the PCB area)
3 Components height Above ≤130mm under ≤8mm
4 Capacity 130KG

5

Preheating length

600mm 1 sections infrared PID Control;Power comsumption:4W

6

temperature accuracy

±2

7

spray way

 spray

8

temperature range

room - 300℃

9

wave height

0—8mm, keep balance wave crest

10

heating controlling

PID

11

speed

0—1800mm/min

12

start power/normal power

12KW/6KW

13

Power supply

380V 3 phase 50HZ

14

preheating  temperature

room—250℃

15

Width adjust

Manual adjusting

16

Transmit angle

3-8

17

Direction

right→left (left→right optional )

18

Weight (Kg)

350KG

19

Dimension

1650*1100*1600MM
it is 2450mm when the machine include loading and cooling system.


←[Previous:] [Next:]→

Related Products :
Large Wave Solder Machine
LF400 Series
Large Wave Solder Machine
Wave Solder Machine
LF260 Series
Wave Solder Machine
Dual Wave Solder Machine
LF255 Series
Dual Wave Solder Machine
Small Wave Solder LF233 (Lead Free)

Small Wave Solder LF233 (Lead Free)
Benchtop Wave Solder (Lead free)

Benchtop Wave Solder (Lead free)
Wave Solder Machine
LF300 Series
Wave Solder Machine
Nitrogen dual wave soldering machine LF400NC

Nitrogen dual wave soldering machine LF400NC
Bench Top Wave Solder Machine LF230 (lead)

Bench Top Wave Solder Machine LF230 (lead)