Pick and Place Machine,Reflow Oven,Wave Soldering,Small Benchtop SMT,Stencil Printers,PCB Magazine Loader
Products Category
Contact Us

Name: Beijing Glichn S&T Development Co.,Ltd
Tel: +8610-65734544
Fax: +8610-65734544
Mobile: 13146162617
E-mail: info@smtchn.com;sales@smtchn.com
Add: Sales department: Floor 17th,Building No.6,Area 7th,ChaoXinJiaYuanDongLi,Chaoyang District,Beijing,China


• SMT technology • Package sizes introduction • Reworking defective SMD compon • Assembly components techniques • SMT placement equipment


Dip Coater DT180

Dip Coater DT180 Dip Coater DT180 Dip Coater DT180
Product name:Dip Coater DT180

Dip Coater DT180  -----Dip Coating Machine
Product introduce

Dip Coater  System DT180   is used to dip materials in liquid, forming thin film on the surface by pulling; this can be used for silicon, wafers, glass, ceramics, wood, metal and other solid surface coating process. It can be applied in scientific research, education and production.


 1 Computer-controlled,parameters memory function, a key to reset to ensure the experiment process can be repeated; Real data display which is convenient to observe; automatic stop and voice report;

2 High precision line guide screw controls running, making running precise and accuracy;

3 Two working stations: there can be put two beakers to fill different viscosity colloid;

Every working station can hold many slides, high working effective;

4 Spring holds slides, simple structure and easy operation;


Power supply: AC220V 50HZ

Power consumption: 30W

Fastest line speed: 300mm/min

Slowest line speed: 5.9X10-7 m/sec 1mm/0.47 hours

Effective height: 128mm

Time set: 1s-9 hours 59 minutes 59 seconds

Dimension: 320mm x 260mm x 330mm
Dip coating description:

Put the substrate into the liquid, with pre-set speed pull it up slowly in a certain temperature and air environment to form thin film on the surface of substrate. The thickness of film is decided by pulling speed, solid concentration and liquid viscosity. By sol gel coating film on the surface, air will make solvent evaporate, and then the sol will be destabilization into gel process; because of tiny particles (nano) in the sol, it will form transparent film; Dip coating can be used for larger substrate, irregular shapes, double sides and multi-sides film coating.

←[Previous:] [Next:Spin Coating SP100]→

Related Products :
Vacuum reflow oven ZR200
Vacuum sintering furnace
Vacuum reflow oven ZR200
Laboratory Spin Coater/Spin coating processor T108(new)

Laboratory Spin Coater/Spin coating processor T108(new)
Single-side Mask Aligner GK2

Single-side Mask Aligner GK2
Spin Coater T200
Spin Coating System
Spin Coater T200
Spin Coater SP100
Spin Coating SP100
Spin Coater SP100
Spin Coater T100
spin coating system T100
Spin Coater T100