Description
SMT Pick and place machine GP600
Computer control system
The SMT placement machine is generally equipped with computer monitor and mouse. It supports XP and Windows 7. It enables visual programming and PCB file import because of the humanized operating system.
Automatic PCB loader
The SMT placement machine can directly put the printing finished PCB board onto
the track to realize automatic board loading, aiming and placing and mounting. It supports multi-feeders: maximum 64 feeders. The size of standard IC tray, tube feeder, stick feeder can be adjustable.
Synchronous identification by six sets of cameras
The SMT placement machine is equipped with 8 cameras: one MARK, one high precision camera and 6 high-speed cameras. It can realize 6-head synchronous identification to ensure the speed and precision of mounting. The standard configuration is 16 JUKI high precision suction nozzles.
Servo system
The SMT placement machine is equipped with servo system imported from
Panasonic, Japan with high precision and stability to ensure 24-hour stable mounting.
Chain
It adopts high pressure resistant and wear-proof drag chain which is the same type as the one of imported machines. The drag chain can bear thousands of times of proof pressure.
Track
It adopts high precision track from TBI Taiwan which has low noise and high precision to ensure the accuracy rate of BGA chips.
Conveyor
This SMT placement machine can be automatically connected to conveyor which can transport the PCB board to the SMT reflow soldering machine without manual assistant, thus saving labor cost.
Pick and place machine GP600
Technical Parameter：
Number of feeders | 64 |
Number of head | 6 |
XYZ Drive Guide Rail | TBI High-precision heavy-duty straight-line guide rail |
Number of camera | 8 |
Maximum circuit board area | 510×450mm |
Number of IC Tray | 48 |
Average power | 500W |
Positioning precision | 0.01mm |
The buffer range of suction nozzle | 4.5mm |
Power supply | 220V, 50/60Hz |
Compressed air | 0.5-0.6Mpa |
Drive motor | Panasonic servo motor |
Vacuum source of suction nozzle | high-speed on-off vacuum generator with vacuum breaker |
Maximum travel scope in Z axis | 20mm |
Tape feeder | 8, 12, 16, 24mm and vibration suction (mounting pipe chip) |
Maximum mounting speed | 11000 Pcs/h |
Average mounting speed of actual mounting resistance | 9200Pcs/h |
XYZ drive guide rail | TBI high-precision reloading linear guide rail |
Motion drive system | Panasonic high-speed DSP drive |
Operating system | full-automatic chip mounter operating system independently |
developed by Huawei Guochuang based on Windows | |
operating systemand it supports windows xp | |
win7 operating system | |
Element angle | 0-360°, synchronous rotation during movement |
X/Y operation mode | intelligent curve of the linear acceleration and deceleration linkage |
MARK point positioning | full-automatic (the MARK point can be adjust at will) |
Intelligent alarm | automatic correction, automatic filling, feeding shortage alarm |
Plate entering mode | automatic connection from left to right in single sections, |
automatic PCB transfer positioning. /plunger positioning, | |
manual plate feeding. | |
Visual display | 17-inch industrial control display, 4:3, resolution: 1280 x1024 |
Number of recognition cameras | One Mark recognition camera, four quick-recognition cameras |
and one precise-recognition camera | |
Number of recognition cameras | One Mark recognition camera, six quick-recognition cameras |
and one precise-recognition camera | |
Adaptive mounting scope | Adaptive to 0201, 0402, 0603, 0805, 1206, diode, audion, SOT, QFP |
within 40*40mm and the pin distance ≥0.3mm | |
(0.5mm center distance) and BGA | |
Product weight | 680KG |
Dimension | 1316*1360*1340mm |
