Description
Pick and Place Machine GP400L
Computer control system
The
SMT placement machine is generally equipped with computer monitor and
mouse. It supports XP and Windows 7. It enables visual programming and
PCB file import because of the humanized operating system.
Automatic PCB loader
The SMT placement machine
can directly put the printing finished PCB board onto the track to
realize automatic board loading, aiming and placing and mounting. It
supports multi-feeders: maximum 50 feeders. The size of standard IC
tray, tube feeder, stick feeder can be adjustable.
Synchronous identification by four sets of cameras
The SMT placement machine is equipped with 6 cameras: one MARK, one
high precision camera and 4 high-speed cameras. It can realize 4-head
synchronous identification to ensure the speed and precision of
mounting. The standard configuration is 16 JUKI high precision suction
nozzles.
Servo system
The SMT placement machine is
equipped with servo system imported from Panasonic, Japan with high
precision and stability to ensure 24-hour stable mounting.
Chain
It adopts high pressure resistant and
wear-proof drag chain which is the same type as the one of imported
machines. The drag chain can bear thousands of times of proof pressure.
Track
It adopts high precision track from TBI Taiwan which has low noise and high precision to ensure the accuracy rate of BGA chips.
Conveyor
This SMT placement machine can be automatically connected to conveyor which can transport the PCB board to the SMT reflow soldering machine without manual assistant, thus saving labor cost.
Technical Parameter:
Specification | |
Number of feeders | 50 |
XYZ Drive Guide Rail | High-precision heavy-duty straight-line guide rail |
Number of cameras | 6 |
Number of heads | 4 |
Average power | 400W |
PCB board into | automatic board |
Guide | Screw guide |
Maximum mounting speed | 9500 Pcs/h |
Average mounting speed of actual mounting resistance | 8000Pcs/h |
Mounter Precision range | 0201-40 * 40 mm, 0.3 mm pin spacing chips |
Maximum travel scope in Z axis | 20mm |
Maximum circuit board area | 500×200mm (Other sizes can be customized) |
Positioning precision | 0.01mm |
The buffer range of suction nozzle | 4.5mm |
Weight | 380KG |
Dimension | 900*1140*1580mm |
Power supply | 220V, 50/60Hz or 110V |
Compressed air | 0.6-0.7Mpa |
Drive motor | Panasonic servo motor |
Motion drive system | Panasonic high-speed DSP drive |
Recognition mode | Simultaneous recognition of four heads |
Vacuum source of suction nozzle | High-speed on-off vacuum generator with vacuum breaker |
Operating system | Full-automatic chip mounter operating system operating system. |
Independently developed by us based on Windows operating system | |
Supports windows xp, win7 | |
Element angle | 0-360°synchronous rotation during movement |
X/Y operation mode | Intelligent curve of the linear acceleration and deceleration linkage |
MARK point positioning | Full-automatic (the MARK point can be adjust at will) |
Intelligent alarm | Automatic correction, automatic filling, feeding shortage alarm |
Plate entering mode | Automatic connection from left to right in single sections |
Automatic PCB transfer positioning/ plunger positioning, manual plate feeding | |
Visual display | 17-inch industrial control display, 4:3, resolution: 1280 x1024 |
Number of recognition cameras | One Mark recognition camera, four quick-recognition cameras |
One precise-recognition camera. | |
Adaptive mounting scope | Adaptive to 0201 0402, 0603, 0805, 1206, diode, audion, SOT, QFP |
Within 40*40mm and the pin distance ≥0.3mm | |
