Description
Automatic Scattered and Tape resistance Forming Machine DS400
◆ Automatic taped lead forming machine is used to form of tapes/bulk resistors, diodes, and other axial components.
◆ It finishes lead-cutting and forming at the same time, components production is up to 60000 pcs /h;
◆ Small dimension and space, it can put on the table or anywhere;
◆ Stepless speed, the forming span and length are adjustable.
◆ Made of steel materials cutter imported from Japan, its cutters are durable.
◆ It can form U-shaped (horizontal) and F-shaped (vertical) leads.
(These two shapes can not be used at the same time. Please tell us which shape you want when making orders)
◆ The U-shape has a special spec US-shape, which points at components of small forming span.
◆ One year warranty, all life repair by our company;
Specification :
Item | Resistances/diodes lead forming and cutting machine |
Name | Motorized tapes & loose resistance forming machine U/F |
Power supply | AC 110V-220V 60Hz/50Hz |
Weight | 30KG |
Dimension | L460*W400*H200MM |
Packing list
No. | Item name | Unit /pc |
1 | Components holder | 1 |
2 | Support holder | 1 |
3 | Components box | 1 |
4 | Six angle wrench | 1 |
5 | User manual | 1 |
6 | Machine body | 1 |
Mototized forming machine (F type): 
No. | Items | No. | Items |
1 | Cutting gear | 13 | Inner gear |
2 | Forming gear | 14 | Cam |
3 | Round cutter | 15 | Vertical axes of inner gear |
4 | Forming blade | 16 | Components out |
5 | Forming blade Al base | 17 | Components in |
6 | Screw | 18 | Plum button |
7 | Adjust pole | 19 | Adjust pole |
8 | Waste box | 20 | Fuse |
9 | Support holder | 21 | Power light |
10 | Bar stopper | 22 | Power on/off |
11 | Block stopper | 23 | Motor controller |
12 | Outer gear | 24 |
Motorzied forming machine U type: No. Items No. Items 1 Cutting gear 12 Outer gear 2 Forming gear 13 Inner gear 3 Round cutter 14 Cam 4 Forming blade 15 Inside adjust pole 5 Forming blade Al base 16 Components out 6 Screw 17 Outside adjust pole 7 Adjust pole 18 Fuse 8 Waste box 19 Power light 9 Support holder 20 Power on/off 10 Bar stopper 21 Motor controller 11 Block stopper 22
Note:
Please check and ensure all screws are fastening before using manual forming machine; operators should avoid to spares crash like cutting teeth, forming teeth, round cutter and forming blade because they are heat treatment parts; it is forbidden that components are into gear that gears will crack; Bending space can be adjustable according to components lead size.
Maintenance:
◆Please clean waste after finishing forming and cutting;
◆Keep forming gear and cutter gear lubricate; operators can add small amount oil every 3-5 days;
◆Wipe little oil on parts to protect them if the forming and cutting machine does not work for long time;
