Wave solder machine LF235

Description

Wave solder machine LF235  ( Dual wave )
Description:
◆Flux spray system:A function of flux spray device

1 nozzle: Japan nozzle ST-6, better spray;

2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe

  3 moving nozzle system: air cylinder driven, spray speed and spray width can be adjusted by handle.

  4 filtration flux system: collecting device is made of multi collecting lay, it is convenient to clean.

5 flux controlling: anti-corrosive controlling flux and display flux.

◆Preheat system:

1 preheat length:400mm 1 sections infrared PID Control，Power comsumption:3KW

2 preheating temperature range: room temperature—250℃

3 controlling way: with PID controlling to make welding process.

4 Heat: infrared heating, temperature uniformity, rapid speed, PID supply heat.

5 Preheating security: surface temperature is lower than fire point of flux.

6 Heat power: total power is 7.8 kw, normal is2 kw;

7 Preheat: it can meet preheating need of batch PCB welding, uniformity

temperature, small temperature differences of PCB.

◆Welding system features:

1 Tin pot material: 316 stainless steel

2 Capacity: 130-160kg double wave crest capacity

3 Tin pot temperature room temperature ——300℃ adjusted;

4 Height range of wave crest: 0—12mm adjustment and keep wave crest balance.

  5 Power consumption (heater): 4.8kw, uniformity heat, long life. It will take 1 hour to melt tin.

  6 Double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.

7 Heat controlling system: PID control, accuracy is ±2

8 Moving tin pot: in and out can be finished by hand.

9 Motor of wave crest: import motor, running stable.

10 Tin pipe: screw thread stem

◆Cooling system

1 Cooling motor: unique cooling design, it can achieve import device effect.

Transmission system

1 chain: stainless steel chain, anti-corrosive,ametabolic.

2 rail system: special strong aluminum

3 speed: 0—1600mm/min

4 accuracy: motor is from Taiwan, it is easy to adjust and maintain.

◆Controlling system

1 buttons on the panel: manual/ automatic control, speed can be set, temperature can be display.

2 protect short circuit: with short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.

3 urgent stop protection: there are 2 urgent stop protection in the machine, please cut off power in urgent condition.

4 whole machine controlling: relay controlling.

5 transmission speed:  motor makes sure stable speed.

6 wave crest: Taida transducer makes wave crest flatter.

7 over-current protection: over-current protection with transducer, it will cut off power when current is over to make motor safe.

8 modularization wiring device: there are main wiring modularization and controlling modularization.

 Specification:

Inquiry Us