How To Choose SMT Pick And Place Machine?

In the marketplace, there are many different placement equipment options available. Machine manufacturers constantly upgrade their features to meet customer expectations and the latest technology requirements.

When it comes to successful PCB assembly, the key is to find the best pick and place machine. There are many factors to consider when choosing the best pick and place machine for the job. Here are some of the most important factors to consider when choosing the pick and place machine for your PCB assembly.

So it is very important to get the answer to How To Choose the Best Pick and Place Machine for PCB Assembly Machine before ordering. Deciding on a pick and place machine can be a difficult decision. This article will provide a few considerations to help you decide on the best pick and place machine for your needs.

Placement equipment is the most important part of SMT line configuration. Almost 50% of the total investment cost is required to purchase pick and place machines with feeders to set up surface-mount production lines.

When we choose SMT mount machine, we can choose from the following aspects:

Visual system

Pick and place machine vision system is the first factor that significantly affects the installation of components. SMT machine needs to know the exact position of the circuit board and determine the relative position of components and boards to ensure the accuracy of automatic assembly.

The imaging is done using a video system. Visual systems are generally classified as top view, up view, head or laser alignment, depending on the position or type of camera. Among the three ways of device alignment (CCD, line-sensor, laser), CCD technology is the best, and the current CCD hardware performance is of a fairly high level. In terms of CCD hardware development, "backlighting" and "front-lighting" technologies, as well as programmable Lighting controls, have been developed earlier to better cope with different component mounting needs.

Feeder

Boom type smt machine support many different types of feeders, such as belt type, disk type, bulk type, tube type, etc. Generally, manufacturers should consider the generality of feeders on their machines, but sometimes manufacturers may design feeders for a particular machine, which limits their use on other machines. Dedicated machines not only cause a large number of feeders to sit idle, but also require space to store them.

Flexibility

Due to the increasingly fierce competition in the current electronic products, the production of uncertainty increased, often need to adjust the output of products or arrange product transformation, so SMT placement machine has put forward the corresponding requirements, requiring has good flexibility, so as to adapt to the ever-changing manufacturing environment, this is what we often say that the flexible manufacturing system (FMS). Machine flexibility is a key consideration when choosing equipment.

Make a decision

Automated equipment is the basis for electronic assembly. The selection of equipment must be based on the following key considerations: machine type, imaging, feeding, and flexibility. With this knowledge, the advantages and disadvantages of different equipment can be identified and an informed choice can be made. At the same time, the choice of equipment should be combined with your own needs, must not blindly seek for bigger and more comprehensive, so as not to cause unnecessary waste.

We’ll give you some honest advice you’ll thank us for later